PM-1800 Steam Heat Shrink Tunnel
3.1 Brief Introduction
1)PM-1800 Steam Heating Shrink Tunnel can be applied to different and irregular bottle types, e.g. round,square and flat bottles.
2)It adopts seamless tube, the distribution of low-pressure steam drum and the spout of steam use the separation style which make the tunnel smooth.
3)The steam nozzle is divided to three adjustable segments; the height, position and steam output of each segment can be adjusted respectively; this guarantees a perfect shrinking effect.
4)The whole machine is made of stainless steel with heat preservation, it not only saves energy, but also match with the international safety standard.
5)The reductor and transportation machine is made by Spirax Sarco which has a good working environment.
6)The stainless steel defrosting tray collects condensed water.The whole machine adopts the water-proof design with the convenience of operation and maintenance.
3.2 Technical Parameter
|1||Input Voltage Supply of Blower||∮1, 220 VAC|
|2||Input Voltage Supply of Steam Generator||380V/ 50 Hz|
|3||Working Pressure||<= 0.1 Mpa|
|4||Dimension of Shrink Tunnel ||L1800mm× W400mm × H450mm|
4. Steam Generator
1)The water is fed into the series of wholly automatic electrical heating generator by high pressure potential vortex pump made of copper with short water-supply time and durable service.
2)A floating ball for liquid level is fixed in the water tank to automatically control the water inlet.
3)Working system is all automatically controlled.After connecting the water supply and power supple for 5 minutes or so,it can output the steam continuously with high working efficiency
4.2 Technical Parameter
|1||Input Power Supply||3 Phases 380V/220V|
|4||Water Tank Volume||48L|
|5||Vapor Generation Value||25.8Kg/h|